Silvercrest Clock Radio KH 2398 User Manual

6
Under-Cabinet Radio  
KH 2398  
Under-Cabinet Radio  
Operating manual  
KOMPERNASS GMBH  
BURGSTRASSE 21 ⋅ D-44867 BOCHUM  
ID-Nr.: KH 2398-4/10-V4  
 
INDEX  
PAGE  
Intended Use  
2
2
Items supplied  
Technical data  
2
Safety instructions  
The appliance components  
Setting up the appliance  
Fixing the kitchen radio beneath a wall cabinet  
Setting up the kitchen radio  
The Settings menu  
Further setting possibilities  
Radio operation  
2
4
4
5
5
5
7
8
Non-functionality  
10  
10  
11  
11  
11  
11  
Cleaning  
Disposal  
CE Conformity  
Importer  
Warranty and Service  
Read the operating instructions carefully before using the appliance for the first time and pre-  
serve this booklet for later reference. Pass this booklet on to whoever might acquire the appli-  
ance at a future date.  
- 1 -  
 
assigned radio frequency ranges may not be  
utilised, passed on to third parties or other-  
wise misused.  
Intended Use  
This Kitchen Radio is intended for use either  
free-standing or for assembly beneath a wall  
cabinet. The intended uses for this Kitchen Ra-  
dio are the reception of FM radio transmissions  
and as an alarm/timer, using either signal  
tones or the radio itself.  
Safety instructions  
This appliance is not intended for use  
by individuals (including children) with  
restricted physical, physiological or intel-  
lectual abilities or deficiencies in experi-  
ence and/or knowledge unless they are  
supervised by a person responsible for  
their safety or receive from this person  
instruction in how the appliance is to be  
used. Children should be supervised to  
ensure that they do not play with the ap-  
pliance.  
This Kitchen Radio is not intended for utilisa-  
tion in commercial or industrial applications.  
The warranty does not provide compensa-  
tion for damage caused by improper use of  
the appliance!  
Items supplied  
1 Kitchen radio KH 2398  
1 Mounting plate  
• Always remove the power plug before  
cleaning the appliance.  
4 Screws  
• Check the appliance and all parts for  
visible damages. The safety concept can  
work only if the appliance is in a fault-  
less condition.  
• The power plug must always be easily  
accessible, so that in the event of an  
emergency the appliance can  
2 Batteries type AAA/Micro  
1 Operating manual  
Technical data  
Power supply:  
Power consumption:  
Operation:  
Standby:  
Output level:  
Frequency range  
220-240V , 50 Hz  
~
5 W  
be quickly disconnected from the mains  
power supply.  
approx. 1.8 W  
1 W at 10% THD  
FM 87.5–108 MHz  
Risk of electrical shocks.  
• Connect the appliance only to correctly  
installed and earthed mains power sock-  
ets. Ensure that the rating of the local  
power supply tallies completely with the  
details given on the rating plate of the  
appliance.  
• Arrange for Customer Services to repair  
or replace connecting cables and/or ap-  
pliances that are not functioning properly  
or have been damaged.  
Operating temperature: +5 +35°C  
~
Humidity:  
5
90 %  
~
(No condensation)  
Dimensions  
(W x H x D):  
Weight:  
27,5 x 16 x 6,3 cm  
1.045 g  
Protection class:  
Backup batteries  
AAA/Micro  
II /  
2 x 1.5 V Type  
The technical features of this appliance en-  
able an adjustable reception capability that  
exceeds the permitted frequency range of  
87,5–108 MHz. In some countries, differ-  
ent national regulations may apply to the  
assigned radio frequency ranges. Please  
note that information received outside of the  
• NEVER submerse the appliance in water.  
Wipe it only with a slightly damp cloth.  
• Do not expose the appliance to rain and  
never use it in a humid or wet environ-  
ment.  
- 2 -  
 
Always take hold of the power cable by  
the plug. Do not pull on the cable itself  
and never touch the power cable with wet  
hands, this could result in either a short cir-  
cuit or you receiving an electric shock.  
• Do not place the appliance, furniture or  
anything else on the power cable and en-  
sure that it does not become clamped.  
• NEVER make a knot in the power cable  
and do NOT bind it together with other  
cables. The power cable should be  
positioned so that no one can step on or  
trip over it.  
Ensure that the power cable does not  
become wet during operation.  
• You are not permitted to open the appli-  
ance housing or repair the appliance. If  
the housing is opened, you run the risk  
of receiving a potentially fatal electric  
shock and the warranty lapses.  
Provide a stable location for the appli-  
ance.  
• Do not operate the appliance if it has  
sustained a fall or is damaged.  
Arrange for the appliance to be checked  
and/or repaired by qualified technicians.  
• Keep batteries well away from children.  
Children can put batteries into their  
mouths and swallow them.  
• If a battery is swallowed medical assist-  
ance must be sought immediately.  
Note:  
• Some aggressive furniture finishes can  
have a destructive influence on the appli-  
ance's rubber pads. If necessary, place  
the appliance on a nonslip pad.  
Thunderstorms!  
• Equipment connected to a power supply  
can be damaged during a thunder-  
storm. You should therefore always  
remove the plug from the power socket  
when there is a storm.  
Protect the appliance against drip and  
spray water. Do not place any water-  
filled vessels (e.g. flower vases) on or  
near the appliance.  
Notice regarding separation from  
mains-power  
Risk of fire!  
• Do not use the appliance near hot sur-  
faces.  
• Do not install the kitchen radio close  
to sources of heat such as radiators or  
stoves. Otherwise, it may overheat and  
become irreparably damaged.  
• Do not locate the kitchen radio directly  
above hotplates. The kitchen radio may  
be damaged. There is a danger of fire!  
Never leave the appliance unattended  
while it is being used.  
Never cover the ventilation slots of the  
appliance while it is on.  
The ON/OFF switch does not com-  
pletely disconnect the appliance from  
the power network. Additionally, the  
appliance consumes power when in  
standby-mode.  
To completely separate the appliance  
from mains power, the power plug MUST  
be removed from the mains power socket.  
Notice regarding electrical power  
surges(EFT /electrical fast  
transient) and electrostatic  
discharges:  
• Do not place open fire sources, such as  
candles, on or near the appliance.  
In a case of malfunction due to an electri-  
cal fast transient (power surge) and/or  
electrostatic discharge, the appliance must  
be returned to default settings in order to  
re-establish normal operation. Possibly  
the power supply must be separated  
and then reconnected. The batteries (if  
Risk of personal injury!  
Keep the power cable and appliance  
away from children. Children frequently  
underestimate the dangers of electrical  
appliances.  
- 3 -  
 
present) must be removed and then re-  
inserted.  
d USER/BASS - User switching,  
Bass boost  
f MEM SCAN - for the automatic recall of  
saved radio stations  
Information regarding the  
handling of batteries  
The appliance uses batteries for memo-  
ry conservation. For the handling of bat-  
teries please observe the following:  
g TIMER  
- control for the timer pro-  
gramming  
h MEM SET - to save and automatically  
/AMS  
search and save radio  
stations  
Risk of explosion!  
j MODE/  
- Calls up the settings, Key  
lock  
• Do not subject the batteries to excessive  
heat such as fire, sunlight or similar. Do  
not recharge the batteries.  
• Never open batteries, never solder or  
weld batteries. The risk of explosions  
and injuries exists!  
k Battery compartment  
l DOWN- Selection button down  
1( UP  
2) ON/OFF  
- Selection button up  
- Radio on/off  
Regularly check the condition of the bat-  
teries. Leaking batteries can cause dam-  
age to the appliance.  
If you do not intend to use the appliance  
for an extended period, remove the bat-  
teries.  
• Should the batteries leak, put on a pair  
of protective gloves and clean the battery  
compartment and terminals with a dry  
cloth.  
Setting up the appliance  
First take all appliance components from the  
packaging and remove all packing foil and  
tape.  
Inserting the back-up batteries  
The back-up batteries ensure that the time,  
date and alarm time setting are not lost in the  
event of a power cut. For this you require two  
1.5 V batteries of the type AAA/Micro.  
Important!  
1. Open the lid of the battery compartment  
1& on the underside of the kitchen radio.  
2. Insert the batteries. Make sure the polari-  
ties are correct. Otherwise, the memory  
receipt will not function and damage may  
be caused to the appliance.  
No liability/warranty will be consid-  
ered for damage to the Kitchen Radio  
caused by the effects of moisture, water  
penetration or overheating!  
The appliance components  
(See fold-out illustration "A")  
3. Close the lid of the battery compartment  
1&. The lid must audibly engage.  
q Mounting plate/Baseplate  
w Power cable  
e Wire aerial  
Note:  
The back-up batteries must be checked  
at least once per year and, if necessary,  
exchanged for new ones.  
ru M1–M4 - Memory buttons M1–M4  
Alarm1-4  
i DIMMER  
/AOT  
- Alarm buttons 1-4  
- controls the display  
lighting, controls the  
switch-off timer  
o Display  
a VOL —  
s VOL +  
- Volume down  
- Volume up  
- 4 -  
 
2. Push the two rear retainer lugs on the  
mounting plate qinto the recesses on the  
lower side of the kitchen radio.  
3. Press the mounting plate qfirmly into the  
appliance underside until it perceptibly  
engages.  
Fixing the kitchen radio beneath a  
wall cabinet  
With the supplied mounting plate q you can  
fix the kitchen radio below, for example, a  
kitchen wall cabinet:  
1. Determine a suitable location for the  
kitchen radio.  
2. Press the two retaining levers on the back  
of the appliance down. Push the mounting  
plate q back and remove it.  
3. Hold the mounting plate q under the in-  
stallation location. Thereby, the front edge  
of the mounting plate q should be ap-  
prox. 4 cm behind the front of the kitchen  
cabinet (See fold-out illustration "B").  
4. Mark the four points for the drillholes with  
a pencil.  
Providing mains power  
• When you have completed installation of  
the appliance, insert the plug into a mains  
power socket. The display ois illumi-  
nated and the appliance tries to receive  
an RDS signal to automatically adjust  
the time and date.  
For as long as the appliance waits for  
the RDS signal, the display o shows  
"Please wait for setting thanks". This  
can take several minutes. To hide this no-  
tice, press the button MODE/  
j.  
5. Using a spike, make a small depres-  
sion at the marking points. Firmly secure  
the mounting plate q with the supplied  
screws.  
6. Hold the kitchen radio slanted, with the  
two recesses in the retaining lugs on the  
mounting plate q. Press the kitchen radio  
upwards until it perceptibly engages.  
The Settings menu  
Setting the time  
Should this not succeed, you must set the  
clock manually. For this, the radio cannot be  
switched on (= automatic mode).  
1. In automatic mode press the button  
MODE/  
blinks.  
j once. The time display  
Disassembly  
• To disassemble the kitchen radio, press  
the two retaining levers at the rear of the  
appliance downwards. Then pull the ra-  
dio out to the front and remove it.  
• Unscrew the screws and remove the as-  
sembly plate q.  
2. Press the buttons UP/DOWN1(/l  
to set the time in minute intervals. Pressing  
and holding the button changes the time  
at ten-minute intervals.  
3. Press the button MODE/  
j once  
again to save the time and switch to the  
date setting.  
If you do not press a button for 15 seconds  
when making the settings, the appliance saves  
the current setting and returns to automatic  
mode.  
Setting up the kitchen radio  
Do not set the kitchen radio up without the  
mounting plate q. Otherwise the speakers are  
covered and the sound is scarcely audible.  
To fit the kitchen radio with the supplied  
mounting plate q:  
Setting the date  
1. In automatic mode press the button  
1. Simultaneously press the two retaining  
levers on the back of the appliance down.  
Push the mounting plate q back and re-  
move it.  
MODE/  
j twice. In the display o  
appears "01.01.2010", the date display  
flashes.  
- 5 -  
 
The appliance will remind you of a date  
that you have set with the reminder function.  
Then, on this given day from 08:00 – to  
23:00, and on every full hour, the acoustic  
reminder alarm sounds for 10 minutes if you  
do not stop the alarm. In addition, the SDA-  
panel in the display o blinks. To stop the  
reminder alarm, press any button.  
2. Press the buttons UP/DOWN1(/l  
to set the date at day intervals. Pressing  
and holding the buttons changes the date  
at intervals of 10 days.  
3. Press the button MODE/  
j once  
again to save the date and to switch to  
setting the memory function.  
If you later press the DOWN buttonlin  
automatic mode, the display o briefly shows  
"DAY". Subsequently, the time and date dis-  
play alternate themselves. To switch back to  
an exclusive time display, press the button  
DOWNl once again.  
Setting the update function  
Using this function, the appliance can auto-  
matically update the settings for the clock  
based on the RDS data.  
1. In automatic mode press the button  
Setting the memory functions  
You can programme in up to 6 dates, which  
the appliance will remind you of when they  
are reached.  
MODE/  
j four times. The display o  
shows "UP DATE".  
2. Press the button DOWNl, to deacti-  
vate the actualisation function. The blink-  
ing clock symbol in the display o then  
disappears.  
1. In automatic mode press the button  
MODE/  
j three times. The display  
3. Press the button UP1(to reactivate the  
update function. The hour symbol ap-  
pears.  
o shows alternatively a date and the  
SDA 1 indicator for reminder date 1.  
2. Press the buttons UP/DOWN1(/l  
to set the first desired reminder date. As  
the earliest possible date you can set the  
following day. Pressing and holding one  
of the buttons changes the display in ten-  
minute intervals.  
3. When you press the button TIMER g, the  
year number is deactivated and thus you  
are reminded on this date every year.  
4. Should you wish to programme in further  
SDA's, press the button MEM SCAN f to  
select the desired memory positions 2-6.  
The selected memory location (SDA 2-6)  
will be indicated in the display o.  
4. Press the button MODE/  
jonce  
again to save the settings of the update  
function (the display flashes for 15 sec-  
onds, after that the saving is finalised)  
and to switch to setting the 12 or 24 hour  
mode.  
Setting the dimmer function  
In automatic mode press the button MODE  
/
j five times. Or press and hold the  
button DIMMER/AOT i to set the dimmer  
function outside of the Settings menu. In the  
display o appears either DIM ON (delivery  
state) or DIM OFF. Press and hold the button  
DIMMER/AOT i once again to change the  
dimmer setting.  
DIM ON: The display o lights up for 15 sec-  
onds when a button is pressed.  
DIM OFF: The display o is permanently lit.  
5. Follow the same steps with the other  
dates.  
6. To deactivate the memory function, pro-  
gramme in a date that lies in the past.  
7. Press the button MODE/  
jonce  
again to save the settings of the memory  
function and to switch to setting the up-  
date function.  
- 6 -  
 
Selecting 12 or 24 hour time display  
Interrupting the kitchen timer.  
• To interrupt the kitchen timer, switch to the  
kitchen timer mode by pressing the button  
TIMER g.  
• Then briefly press the button TIMER g to  
interrupt the kitchen timer.  
1. In automatic mode press the button  
MODE/  
j six times. In the display  
o appears "24 HOUR" for the 24 hour  
modus.  
2. Press the button DOWNl to select the  
12 hour modus. In the display o appears The time is halted, the indicator blinks for 15  
"12 HOUR". Press the button UP1( to re-  
turn to the 24 hour modus.  
seconds. After this period the appliance re-  
turns to automatic modus. To restart the kitchen  
In the 12 hour mode, „PM” (post meridiem = timer, briefly press the button TIMER gagain  
afternoon) appears before the time indcator  
to switch back into the kitchen timer mode.  
in the display o from 12:00 to 23:59.  
Press the button TIMER g once again. The  
time then continues to run.  
Press the button MODE/  
j to save the  
menu settings and to close it down.  
• To completely switch the kitchen timer off,  
press and hold the button TIMER g for 3  
seconds The clock and cooking pot sym-  
bol disappear.  
Further setting possibilities  
Kitchen timer  
1. Press the button TIMER g.  
Programming the kitchen timer  
You can programme frequently used times for  
the kitchen timer into the appliance, so that  
you do not need to enter them in repeatedly.  
As the appliance can be used by several  
people, it has user switching, A/B. Both users  
can save 8 different timer periods each.  
2. Using the buttons UP/DOWN1(/l,  
set the desired time interval (a time span  
between 1 minute and 23:59 h is pos-  
sible). Pressing and holding one of the  
buttons changes the display in ten-minute  
intervals. Or press one of the buttons  
M1–M4 ru to recall a saved preset  
time for the kitchen timer. The following  
times are factory pre-programmed:  
M1 r = 5/25 min. (Indicator = T1/5)  
M2 t = 10/30 min. (Indicator = T2/6)  
M3 y = 15/35 min. (Indicator = T3/7)  
M4 u = 20/40 min. (Indicator = T4/8)  
3. Press the button TIMER g once again to  
start the kitchen timer. In the display o a  
clock icon running in reverse and a cook-  
ing pot symbol appears.  
1. First, select the desired user. To switch  
between users, press and hold the button  
USER/BASS dfor two seconds. Depend-  
ing on the selected user, the display o  
indicates either "A" or "B".  
2. Then press the button TIMER g.  
3. Using the buttons UP/DOWN1(/l  
enter in the desired time.  
4. Press the button MEM SET/AMS h. On  
the right and next to the time indicator, "T"  
lights up.  
4. From 30 seconds before expiry of the time  
span an acoustic signal sounds, repeating  
at shorter intervals the closer the set time  
approaches. When the time has expired,  
the alarm sounds continuously and with  
increasing volume.  
5. In order to occupy one of the memory  
locations 1–4, press the desired memory  
location button M1–M4 ru under  
which the time for the kitchen timer should  
be saved once. Its number is now shown  
to the right of the "T". To occupy one of the  
memory locations 5–8, press the desired  
memory location button M1–M4 ru  
twice.  
5. Press the button TIMER gto terminate the  
acoustic signal.  
- 7 -  
 
through repeated brief pressing of the  
TIMER g button, select a specific week-  
day (e.g. only "We"). The selected setting  
is indicated in the display o.  
6. Press the button MEM SET/AMS h once  
again to conclude the saving. The display  
flashes for 15 seconds, after that the sav-  
ing is finalised.  
6. To return to the selection of workdays,  
weekends or whole weeks, once again  
hold the button TIMER g pressed down  
for 2 seconds.  
Setting alarm times (Alarm 1–4)  
You can programme four alarm times with  
your kitchen radio.  
7. After 15 seconds the blinking in the dis-  
play stops and your input is saved. The ap-  
pliance then returns to automatic modus.  
Alarm function  
Symbol in the display o  
Acoustic signal  
When the alarm signal sounds...  
• and the alarm function "Radio" has been  
selected, the radio plays for one hour at  
a pre-defined alarm volume. To exit, press  
one of the ALARM buttons 1–4 ru.  
• and the alarm function "Signaltones" has  
been selected, the signal tone sounds for  
10 minutes, with an increasing volume. To  
exit, press one of the ALARM buttons 1–4  
ru.  
Radio  
Switched off  
no symbol  
1. In automatic mode, press one of the  
ALARM buttons 1–4 ru to select the  
location for the to be programmed alarm  
memory. In the display o the last set  
alarm time and the symbol for the type of  
alarm blink for 15 seconds.  
2. Press the buttons UP/DOWN1(/l  
to set the desired alarm time.  
3. Repeatedly press the ALARM button pre-  
viously pressed until the desired alarm  
function (see table above) is indicated in  
the display o.  
4. Repeatedly press the button TIMER gto  
set the weekdays on which you require the  
alarm function: You can select between  
"workdays" (Mo, Tu, We, Th, Fr), "week-  
ends" (Su, Sa) and "every day" (Su, Mo,  
Tu, We, Th, Fr, Sa). Thereby, orientate  
yourself on the weekday indicator in the  
display o:  
Radio operation  
For radio reception, completely unwind the  
wire aerial e and, with the radio switched  
on, determine the most favourable position-  
ing for it.  
Switching the radio on and off  
1. To switch the radio function on, press the  
button ON/OFF 2). In the display o the  
currently selected frequency is shown.  
2. Press the button ON/OFF 2) once again  
to switch the radio off and return the ap-  
pliance to the automatic modus.  
Manual station selection  
Mo  
Tu  
We  
Th  
Fr  
Sa  
Su  
= Monday  
= Tuesday  
= Wednesday  
= Thursday  
= Friday  
= Saturday  
= Sunday.  
1. Briefly press the button UP1( repeat-  
edly to search for stations with a higher  
frequency than the one shown in the dis-  
play o.  
2. Briefly press the button DOWNl  
repeatedly to search for stations with a  
lower frequency than the one shown in  
the display o.  
5. If you hold the button TIMER g pressed  
down for 2 seconds, you can also,  
- 8 -  
 
3. Should the currently adjusted station trans-  
mit RDS data, the indicator in  
If the memory location button ruhas  
been pressed previously, the memory loca-  
tion indicator and the MEM" indicator blink.  
3. Press one of preset buttons M1–M4  
ru, if necessary repeatedly, to save  
the radio station to the desired save posi-  
tion. In the display o, the indicator for the  
save position selected by you and "MEM"  
blink.  
the display o blinks. Then the display  
o shows the name of the radio station,  
and the time is updated (if activated in  
the settings, see section "Setting Update  
function"). During a running time update  
via RDS the clock icon in the display o  
flashes.  
4. Press the button MEM SET/AMS h once  
again. "MEM" and the save position are  
constantly indicated, the radio station is  
saved.  
5. Repeat the steps 1 to 4 (for both users)  
until all of the desired radio stations are  
saved.  
6. To recall the saved radio stations, press  
the corresponding preset buttons (M1–  
M4 ru) in radio mode, several times  
if need be, until the number of the saved  
position appears in the display o.  
Automatic station search  
You can have the kitchen radio search for  
stations. The kitchen radio searches the fre-  
quency range until it finds a station.  
1. Press and hold the button UP1( for two  
seconds: the kitchen radio searches for  
the station with the next highest frequency.  
2. Press and hold the button DOWN  
l for two seconds: the kitchen radio  
searches for the station with the next low-  
est frequency.  
Repeat these steps until you have found a  
radio station to your liking.  
Automatically save and recall a radio  
station  
With the AMS function (Automatic Memory  
System), the radio automatically searches  
for stations and stores them at the memory  
locations. Previously saved radio stations are  
thereby erased.  
Save and recall a radio station manually  
As the appliance can be used by numerous  
people, it is fitted with user switching, A/B.  
Both users can save different radio stations.  
To switch between users, press and hold the  
button USER/BASS d for two seconds.  
1. Press and hold the button MEM SET/  
AMS h for two seconds. The kitchen ra-  
dio automatically searches for sufficiently  
powerful radio stations and saves them in  
the memory.  
2. The station search can be stopped by press-  
ing on the button MEM SET/AMS h. The  
most recently found radio station plays.  
3. When you press the button MEM SCAN  
f, the saved radio stations are recalled  
in their sequence and each is played for  
15 seconds.  
Each user can save 32 radio stations in the  
appliance. Available for this are:  
Preset button M1 r for the save positions  
A0 – A7,  
Preset button M2 t for the save positions  
B0 – B7,  
Preset button M3 y for the save positions  
C0 – C7, and  
Preset button M4 u for the save positions  
D0 – D7.  
Press the corresponding preset button once  
to address the save position "0", press twice  
for "1", etc.  
4. To quickly move on to another radio sta-  
tion, press the button MEM SCAN f.  
5. To quit the automatic recall, press the but-  
1. Set the user and the desired radio station.  
2. Press the button MEM SET/AMS h.In  
the display o the "MEM" indicator blinks.  
ton MODE/  
j. The display o will  
then show the time for 15 seconds.  
- 9 -  
 
Adjusting the volume.  
the display o the AOT indicator and a  
clock symbol appear when the switch-off  
timer function is activated. After a few  
seconds, the frequency is indicated once  
again.  
• To reduce the sound volume, in radio op-  
eration repeatedly press the button VOL  
a, or hold the button down.  
• To increase the sound volume, in radio op-  
eration repeatedly press the button VOL. +  
s, or hold the button down.  
3. At any time you can press the DIMMER/  
A.O.T. i button to blend in the remaining  
countdown time for a few seconds.  
4. On expiry of the time period the appli-  
ance switches itself off.  
5. To simply switch the unit off, press the but-  
ton ON/OFF 2).  
Lock function  
You can lock the kitchen radio so that settings  
cannot be altered by unauthorised people or  
children.  
• Press and hold the button MODE/  
j
for 3 seconds. A key symbol appears in  
the display o.  
• When a key is pressed and the lock is ac-  
tivated, the key symbol blinks but no other  
functions are carried out.  
Non-functionality  
• Do not attempt to take the device apart  
and/or, in the event of possible defects, to  
repair yourself. You could potentially dam-  
age the sensitive electronic components.  
• Repairs to your device must be carried out  
exclusively by qualified service personnel!  
• No warranty/liability will be assumed for  
damage resulting from improper use and/  
or opening of the device!  
• To disable the lock function, press and  
hold the button MODE/  
key symbol extinguishes.  
j until the  
Bass  
Should you wish to have an amplified repro-  
duction of the lower frequencies, press the  
button USER/BASS d when in radio modus.  
In the display o the indicator "BASS" then  
appears. Press this button once again to de-  
activate the function.  
• In the event of malfunction please get in  
touch with the corresponding service affili-  
ate in your country.  
Cleaning  
Displaying the time  
Warning!  
Always remove the plug before clean-  
ing the appliance!  
To display the time for 15 seconds during  
radio operation, press the button MODE/  
j.  
Moisture penetrating into the appliance  
creates the risk of electric shock! Addi-  
tionally, the kitchen radio could become  
irreparably damaged!  
A.O.T. - Switch-off timer  
This appliance is fitted with a switch-off  
timer for up to 90 minutes.  
1. Press the button DIMMER/A.O.T. i to  
call the function up and, if need be, to  
switch the radio on.  
2. Repeatedly press the button DIMMER/  
A.O.T. i to programme in the number of  
minutes, in increments of 5 minutes, for  
which the appliance is to remain switched  
on. The default setting is 90 minutes. In  
Clean the housing of the kitchen radio with  
a slightly moist cloth and a mild detergent  
only. Ensure that moisture cannot permeate  
into the appliance during cleaning!  
- 10 -  
 
Disposal  
CE Conformity  
Do not dispose of the appliance  
in your normal domestic waste.  
This product is subject to the  
provisions of European Directive  
2002/96/EC.  
This device complies, regarding conformity,  
to the basic requirements and other relevant  
provisions of the Low Voltage Directive  
2004/108/EC, the Directive for Low Volt-  
age Appliances 2006/95/EC and the Eco  
Design Directive 2009/125/EC (Ordinance  
1275/2008 Appendix II, Number 1).  
Disposing of the appliance  
• Arrange for the product, or parts of it, to be  
disposed of by a professional disposal com-  
pany or by your communal waste facility.  
Observe the currently applicable regula-  
tions. In case of doubt, please contact  
your waste disposal centre.  
Importer  
KOMPERNASS GMBH  
BURGSTRASSE 21  
44867 BOCHUM, GERMANY  
Disposal of batteries/accumulators  
• Used batteries/rechargeable batteries  
may not be disposed of in household  
waste.  
• Batteries/rechargeable batteries can  
contain toxic substances which may  
damage the environment. Therefore,  
dispose of the batteries/rechargeable  
batteries in accordance with statutory  
regulations.  
• Every consumer is statutorily obliged to  
dispose of batteries/rechargeable bat-  
teries to a community collection centre in  
their district or to a dealer. The purpose  
of this obligation is to ensure that bat-  
teries are disposed of in a non-polluting  
manner.  
Warranty and Service  
The warranty for this appliance is for 3 years  
from the date of purchase. The appliance  
has been manufactured with care and me-  
ticulously examined before delivery. Please  
retain your receipt as proof of purchase. In  
the event of a warranty claim, please make  
contact by telephone with our Service De-  
partment. Only in this way can a post-free  
despatch for your goods be assured.  
The warranty covers only claims for material  
and maufacturing defects, but not for trans-  
port damage, for wearing parts or for dam-  
age to fragile components, e.g. buttons or  
batteries. This product is for private use only  
and is not intended for commercial use.  
Only dispose of batteries when they are  
fully discharged.  
The warranty is void in the case of abusive  
and improper handling, use of force and  
internal tampering not carried out by our  
authorized service branch. Your statutory  
rights are not restricted in any way by this  
warranty.  
Disposal of packaging  
Dispose of all packaging materials in  
an environmentally friendly manner.  
The warranty period will not be extended by  
repairs made unter warranty. This applies al-  
soto replaced and repaired parts. Any dam-  
age and defects extant on purchase must be  
reported immediately after unpacking the  
appliance, at the latest, two days after the  
- 11 -  
 
purchase date. Repairs made after the expi-  
ration of the warranty period are subject to  
payment.  
DES Ltd  
Tel.: 0871 5000 700 (£ 0.10 / minute)  
Kompernass Service Ireland  
Tel: 1850 930 412 (0,082 EUR/Min.)  
Standard call rates apply. Mobile operators may  
vary.  
Kompernass Service Cyprus  
Tel.: 800 94401  
- 12 -  
 

Sharp PDAs Smartphones EL 6985 User Manual
Shure Headphones I3C User Manual
Soleus Air Air Conditioner GM TTW 10HC User Manual
Sonic Alert Clock Radio B31540 02 User Manual
SpeakerCraft Speaker DT 6 User Manual
Speed Queen Washer 25 lb User Manual
Stamina Products Home Gym 15 0120A User Manual
Sunbeam Waffle Iron SR6855B User Manual
Swann Home Security System SR244 BVD User Manual
Sylvania Table Top Game F075615 User Manual