• User Manual •
SB2112
Basic Phone
SB2112 User Guide
PRODUCT OVERVIEW
8
1
2
3
7
4
5
6
Description:
1. FLASH key
2. MUTE key
3. 0-9/*/# key
4. RINGER ON/OFF switch (optional)
5. DIAL TONE/PULSE switch(optional)
6. REDIAL key
7. Handset Cord jack
8. TEL LINE jack
1. SWITCH OPERATION
RINGER ON/OFF switch
You can turn the switch ON/OFF using the Ringer switch. This feature is optional depending
on the country you have purchased from.
DIAL TONE/PULSE switch
You can switch between TONE/PULSE using the Dial switch. This feature is optional
depending on the country you have purchased from.
2. FUNCTION KEY OPERATION
FLASH key (600ms)
In the on-hook mode, press this key to auto-hang up for 600ms, after that you can press
REDIAL key or dial out another number.
2
SB2112 User Guide
MUTE key
While you are on the line, if you do not want the remote party to hear you, just press and
hold the MUTE key.
REDIAL key
In the handset off-hook mode, press this key to redial the last dialed number.
TROUBLESHOOTING GUIDE
(Q) I do not hear any dial tone from the handset.
(A) Ensure the handset cord is connected correctly to the handset cord jack at the base.
Ensure you have plug in the telephone cable from the telephone to the wall socket correctly.
If the problem persists, please check with your local dealer.
DECLARATION OF CONFORMITY
The telephone complies with the essential protective requirements and objectives of:
•
•
•
EC R& TTE Directive 1999/5/EC
EC Low Voltage Directive 73/23/EEC
EC EMC Directive 89/336/EEC
And conforms to the following relevant harmonized standards:
•
•
EMC: EN55022, EN55024
Safety: EN 60950
Created on 28th October 2005. SB2112 Basic Phone.
Please visit us at www.shirocorp.com.
3
|